How do I know my sunglass size?
Measure the distance across your face, from one temple to the other. That distance is the best frame size for your face. Most temples run from 5 to 7 inches long. The average for men is 5 ¾” (145 mm); for women it is 5 ¼” (133 mm) or 5 ½” (139 mm).
How do I measure 58 mm sunglasses?
Above you see an image and the size “58mm” is measurement “A”, or the width of one of the lenses at it’s widest point. So to calculate the width of the frame you need to take the “58mm” times 2 (2 lenses) PLUS the DBL (Distance Between Lenses) PLUS the width of the hinges at the sides of the frame.
What is eyeglass bridge width?
The bridge width is the distance from lens to lens measured from the inside of the rim across your frame.
How do you measure a bridge for glasses?
So, how to measure nose bridge for glasses? Bridge width is commonly known as the distance between the lenses from inside of the rim across the frame. You can find the bridge width on the side of the frame measurements and it is usually the middle(second) number.
How should glasses bridge fit?
They should fit securely on the bridge with no pinching. You should be able to bend over, wiggle your head from side to side, and basically prance around without those babies falling off or sliding up and down. If the bridge is too small, your glasses will be situated overly high on your nose, plus they’ll pinch.
What is bridge size in sunglasses?
Bridge Width This is the distance between your two lenses. In short, the bridge width is the space where your frames fit against your nose. The size of this piece ranges from 14mm to 24mm.
How do I determine my bridge size?
Use a mirror or photo to find the position and width of your nose bridge.
- If the bridge sits below your pupils, then you should look for bridges in the 16–18 millimetres (0.63–0.71 in) range.
- Judge whether your nose bridge is narrow or wide.