How much horsepower does it take to run a round baler?

PTO horsepower requirements for round balers start at 30 hp and can run up to 120 hp. There are a couple of different options when it comes to bale size in balers. Balers can be fixed chambered, variable chambered, or a combination thereof.

What horsepower is a 9700 Ford tractor?

Ford 9700

Ford 9700 Power
Drawbar (tested): 113.32 hp 84.5 kW
PTO (tested): 135.64 hp 101.1 kW
power test details …

How much horsepower does a hay baler need?

Most standard square balers on the market require 35 horsepower at your tractor’s PTO, and a minimum tractor weight of around 3000 pounds.

What engine is in a 9700 Ford tractor?


Make: Ford Model: 9700 Years Made: 1977-1979
HP-Range: 136 Engine-Make: FORD Engine-Fuel: DIESEL/TURBO
Engine-Cyl(s)-CID: 6/401 Transmission-STD: Optional:
Fwd/Rev Standard: 16/ Fwd/Rev Optional: Mfwd-Std/Opt:
Tires-Std Front: 11.00-16 Tires-Std Rear: 18.4-38 Wheelbase-Inch:

What size tractor do I need for a round baler?

Hay Master For example, a baler that recommends 50 HP, I’d prefer to have a tractor at least 75 HP to pull it. As others have said, you’d probably be even happier at 100 HP. That said, for the number of bales per year you indicated, you could make do with a 50-75 hp utility tractor.

What size tractor do you need for round bales?

A properly ballasted 3 series could do the job, depending on bale weight. If the bales are 1200 pounds a 3R would work. Now if the bales are the 1500-1800 pounds, then you will want a 4 series and even then properly ballasted.

How much HP does a 4×4 round baler need?

Senior Member. The smallest 4×4 balers can run on 40ish hp but are much faster with 65 hp or better.

How much horsepower does a John Deere 4020 have?

The 4020 Diesel has a six-cylinder engine tested at 84 drawbar and 91 PTO horsepower. John Deere’s Syncro Range transmission with 8 forward speeds and two reverse speeds was standard, a power shift transmission was optional.

How many hours does a Ford 9700 tractor have?

Up for auction Ford 9700 tractor. 8,800 hours, Equipped with working PTO and 3PT, A/C and heat, rear hydraulic remotes, Runs and drives like it should. Please see our pictures and video attached in the viewing section. Feel free to call with any questions or concerns. Thanks!!! Enter search information and click the Search button below.

How much hp for a tractor with a baler?

A 75hp (56 kW) tractor was suggested by the manufacturer to fully utilize baler capacity on soft and hilly fields.” Hope this helps. It’s notice to be in that 60-100 hp range. It is nice to be in the 60-100 hp range, is what I was saying. Sigh….

How many different types of John Deere balers are there?

There are 16 different options in the John Deere Zero Series Baler line. Each model is listed below from lowest to highest horsepower requirements. The low horsepower round balers, like the 450E, 450M, and 550M models can be paired with any of the John Deere 5-Series or 6-Series utility tractors.

What size tractor do I need for baling?

And on hilly ground you are also better off using a bigger heavier tractor while baling on a down hill side, as you will need to stop the tractor and baler to tie and eject the bale. A 5×4