What does position light malfunction mean Volvo?
The Bulb Failure Position Light message will come on when one or more of these position lights have failed due to a blown bulb, connection issue, wiring issue, or computer issue.
What does bulb failure light mean?
What the bulb failure light means. The computer will switch on the bulb failure warning light when it detects any non-normal voltage in any of the bulb circuits. If you see the light come on, check all of the bulbs to find the one that is not working.
How do you reset the position light bulb failure?
To reset the service light, turn the key to position 1 (where just the red airbag light comes on), push and hold the reset button on the instrument cluster, while holding the button down turn the key to the on position (when all the lights in the instrument cluster come on) and wait about 10 seconds.
What is the position lamp bulb?
Position lamps can be used so that other road users can see the car if it stops or is parked. The position lamp is switched on with the rotating ring on the stalk switch. Stalk switch rotating ring in position lamps position.
Where is the position light?
“Position Light” refers to the 2 front, 2 side, 4 rear and 2 number plate bulbs.
What are position lights in a car?
“Front position lamps”, known as “parking lamps” or “parking lights” in North America, and “front sidelights” in the UK, provide nighttime standing-vehicle conspicuity. They were designed to use little electricity, so they could be left on for periods of time while parked.
What does light bulb with exclamation point mean?
If illuminated, the light bulb with an exclamation point icon means that one of your exterior bulbs has burnt out (or at least, your Volkswagen believes it has). Check the operation of all exterior bulbs and have the defective one replaced as soon as possible.
What is the position light on Volvo xc70?
“Position Light” is Volvo-speak for Parking/Tail Lights, and the message usually means either bad bulb or bad bulb connection. The best way to deal with the problem is to replace all bulbs in the rear of the vehicle, which is easy.