Why is my Kenwood radio flashing?

Short Circuit Issues You need to start from the battery terminal, and then check the fuse box, stereo connections, and speaker connections to see if there is any short connection that is causing the system to go into protect mode.

Why does my Kenwood radio keep flashing protect?

Kenwood equips its receivers with a protection mode to safeguard them. Your stereo receiver is going into protection mode because the receiver has an internal short, a speaker is bad or the speaker wiring has a problem, such as incorrect wire gauge or bad connections.

How do I connect my iPhone to my Kenwood USB?

Connect your iOS device to the Car Receiver via USB cable. For Multimedia Receivers: Go to Setup • Select “App Setup” Page 7 KENWOOD Remote App User Guide| 5 • In Device Type Selection, select “iPod/iPhone”, and press “Change” • Select “USB 1-Wire” and press “Next” • Select your mobile device, and press “ok”.

How do I get my Kenwood radio out of Protect Mode?

Turn off the receiver and let it cool for a few hours; then try again. If the protection mode warning doesn’t go away on its own, press the reset button. If that doesn’t work, disconnect the power lead from your receiver for 30 seconds and then reconnect it.

How do I play music from a flash drive in my car?

If you have a car with a USB port, put your music files on a flash drive and plug the flash drive into the USB port. If your car doesn’t have a USB port, use an FM transmitter with a USB port that can read and play music files.

How do I play music on a flash drive?

Connect the USB flash drive to the USB A port ( A). Tap the USB-A button. The speaker switches to the USB-A mode, and the USB-A indicator lights up in white. Press the (Play/Pause) button on the remote control to play back music.

What is USB mirroring?

To set up USB Mirroring capabilities, select USB Mirroring from the main menu and follow the on-screen directions for connecting your Android phone or Apple iPhone. Once completed, the unit will mirror phone display onto the unit’s on-screen display.

How do I mirror my iPhone to my Kenwood stereo?

1) On your iPhone, launch “Settings”. Touch “Control Center” and then “Customize Controls”. 2) Touch “Screen Recording” and add to “INCLUDE” list. 3) Launch Control Center of your iPhone, touch and hold Screen Recording icon and then touch “Mirroring for KENWOOD” and start broadcast.

How do I fix Kenwood protected mode?

If that’s the case, fixing the problem is simple. Turn off the receiver and let it cool for a few hours; then try again. If the protection mode warning doesn’t go away on its own, press the reset button. If that doesn’t work, disconnect the power lead from your receiver for 30 seconds and then reconnect it.