Why is my Mac stuck on Apple icon loading bar?

If your Mac is stuck on this screen On notebook computers that have Touch ID, press and hold Touch ID.) Turn your Mac back on. If the issue persists, press and hold the power button until your Mac turns off. Then unplug all accessories from your Mac, including printers, drives, USB hubs, and other nonessential devices.

Why is my IMAC stuck on the loading screen?

There are several reasons due to which MacBook gets stuck with the loading bar. This can be resolved by resetting SMC, booting Mac in Safe Mode, repairing disk permission, resetting NVRAM, and more. All of which is explained below.

What do you do if your Mac is stuck on restart?

How to Fix MacBook Pro Stuck on Loading Screen?

  1. Disconnect the peripherals & restart your Mac.
  2. Reboot into Safe Mode.
  3. Reset Mac SMC.
  4. Reset NVRAM/PRAM.
  5. Reboot in Recovery Mode.
  6. Reboot in Single User Mode.
  7. Reselect the Start Up Disk.
  8. Repair the Start-Up Disk.

Why does Mac take so long to restart?

Your Internet connection may be slow. And if you are using iCloud (you probably are) then your Mac startup time might be increased. If your Mac’s Internet connection is poor, you Mac may struggle to start. If you are having this problem, you may try restarting everything (your Mac, modem and router).

Why is Mac update taking so long?

If your Mac is connected to a fast Wi-Fi network, the download could finish up in less than 10 minutes. If your connection is slower, you’re downloading at peak hours, or if you’re moving to macOS Big Sur from older macOS software, you’ll probably be looking at a much longer process.

How do I force start my iMac?

How to Force Restart Your Mac. Press and hold down the Command (⌘) and Control (Ctrl) keys along with the power button (or the ‌Touch ID‌ / Eject button, depending on the Mac model) until the screen goes blank and the machine restarts.

Why does Mac take forever to restart?

You Mac need sufficient space to run optimally. If your Mac does not have enough space, the slow boot time may occur. On your Mac, click the Apple Menu > About This mac and then click the Storage tab. Review your storage use.

How long should an iMac take to start up?

Typically, you Mac should take about 30 seconds to fully startup.

What happens if you turn off Mac while updating?

What Happens If You Shut Down Mac During Update? As long as you were still downloading the update when it was interrupted, there is no real harm done. It is almost always possible to get your Mac up and running again after installing an update, recovery mode, or Internet recovery mode.