How do I log into my Openreach modem?

You can use the username [email protected] and leave the password blank (if you can’t leave it blank, it’ll accept anything).

Do I need a new router for FTTC?

Fibre to the cabinet (FTTC) Most Broadband Routers are not compatible with the technology used with Fibre Broadband. You will therefore need to swap your existing ADSL/Cable Router for a Fibre Router that provides the throughput speeds and connection required to maximise fibre broadband usage.

How do I configure my fibre modem?

  1. Plug one end of the blue Fibre ethernet cable to the port labelled GE1/LAN1 on your Fibre box (ONT).
  2. Plug the other end of the blue Fibre ethernet cable to the Fibre port on your modem.
  3. Plug one end of the power supply into the Power port of your modem.
  4. Plug the other end into your wall power socket.

How do I log into my BT modem?

How to open the Hub Manager

  1. Open a new web browser.
  2. Type 192.168.1.254 into the address bar.
  3. This will open the Hub Manager.
  4. If you want to make any changes to the hub settings, you’ll need the admin password. You’ll find it on the back of the Hub if you haven’t updated it.

How do I install Openreach modem?

1. Plug the Internet cable provided by BT Openreach (usually grey) into the top socket of your master phone socket. 2. Plug the Ethernet cable (usually red) into the socket labelled LAN1 on your BT Openreach modem and then plug the other end into socket 4 of your Timico router.

Does FTTP need a router?

FTTP connections will only need a router as the NBN connection box serves as a modem. You’ll still need to pick up a router that will connect to the NBN connection box which should be installed within your premises.

How do I connect to my nbn router?

Connect the power cable to the Wi-Fi Router.

  1. Connect the power adapter to the power point.
  2. Connect the Ethernet cable into the ‘Internet’ or ‘WAN’ port.
  3. Plug the other end of the Ethernet cable into port UNI-D1 at the back of the nbn modem.
  4. Connecting via Wi-Fi.
  5. Search for available wireless networks on the computer.

How do I increase my FTTC speed?

Increase FTTC Speed

  1. You could bond 2 or 3 FTTC connections together, this is known as FTTC bonding.
  2. You could ask your provider to apply G. Fast to your line. G Fast is a new type of technology applied to the copper line enabling fibre speeds over copper wires.

Do I need a special router for fiber optic?

No, fiber-optic technology does not need a special router, there are various Wi-Fi routers available in the markets that are compatible with fiber internet speeds. However, if your fiber connection offers faster speeds than your old internet service, you may need to invest in a new wireless router.

How do I connect my router to my ONT?

To connect your router to your internet enabled devices using a wired connection; Using another Ethernet cable, plug one end into any of the LAN ports on your router. Take the other end of the cable and plug this directly into your device. Take one end of an Ethernet Cable and plug this in to the LAN port of your ONT.