Should I leave my Vent-Axia on all the time?

Firstly, a newly installed humidity controlled fan will normally run for an average of half hour whilst the humidity sensor acclimatises, this is completely normal, so please leave the unit to allow it time to settle down.

How does Vent-Axia work?

The whole house system works by replacing the warm stale moist air from the house, with fresh air from outside. The fresh air passes through a highly efficient heat exchanger and is prewarmed by the heat which is recovered from the extracted air. The heat exchanger recovers up to 70% heat from the outgoing stale air.

Who makes Vent-Axia?

In 1957, the company, along with subsidiary Axia Fans, agreed a ninety-nine-year lease on a new 4.5-acre (1.8 ha) site at Manor Royal in Crawley. The company was acquired by the Hall Thermotank Ltd Group and later was sold to Smiths Group in 1992 and became part of Volution Group when it was formed in 2002.

Where is Vent-Axia made?

the UK
Vent-Axia completed the reshoring of the balance of its domestic fan manufacturing, from China back to the UK, in January 2013 with the launch of three new production lines at its Crawley site.

Can you turn Vent Axia off?

To switch the unit off: at the unit’s local isolator, turn the power off.

How often should you change Vent Axia filters?

Over time, filters will collect dirt and debris and become much less effective at removing impurities – dirty/clogged filters will also reduce the flow of fresh air into the dwelling. Filters should be checked every 3-6 months.

Should my extractor fan be on all the time?

Should You Leave an Extractor Fan On? There really is no need for you to leave the fan on all day because the extractor fan will have done its work within its allotted time frame.

Where are xpelair fans made?

Peterborough
Xpelair’s extensive range of products is manufactured with quality at the forefront in a state of the art manufacturing facility in Peterborough.

What is summer bypass Vent Axia?

The summer bypass is pioneering since it is fully automatic and truly intelligent, a first. The summer bypass is set for both comfort temperature and minimum external temperature. These settings enable the controls to determine whether it is winter or summer allowing it to run without homeowner intervention.