Mixed

How do I fix BIOS Error 501?

To resolve the BIOS Application Error (501), restore the BIOS.

  1. Press enter to restart the PC.
  2. If the error displays after restarting, try to restore the BIOS using a USB drive. For more information, see the “Recover the BIOS using a USB recovery drive” section of the following:
  3. If restoring the BIOS fails, contact HP.

How do I fix the BIOS on my HP laptop?

Turn off the computer. Press and hold the Windows + V keys, and then simultaneously press and hold the power button. After 2 to 3 seconds, continue to press and hold the Windows + V keys, but release the power button. When the CMOS Reset screen displays or you hear beeping sounds, release the Windows + V keys.

How do I fix HP boot device not found?

Restoring the BIOS Default Settings

  1. Turn off the computer and wait five seconds.
  2. Press the power button to start the computer and repeatedly press the f10 key to enter the BIOS setup menu.
  3. On the BIOS Setup screen, press f9 to select and load the BIOS Setup Default settings.
  4. Press f10 to Save and Exit.

How do I fix a corrupted BIOS on my laptop?

Steps on How to Repair Corrupted BIOS Firmware

  1. Check if your computer is under warranty.
  2. Boot from the backup BIOS (Gigabyte motherboards only).
  3. Remove the dedicated graphics card.
  4. Reset the BIOS.
  5. Update your BIOS.
  6. Replace the BIOS chip.
  7. Replace the motherboard.

What to do if BIOS is corrupted?

You can do this one of three ways:

  1. Boot into the BIOS and reset it to the factory settings. If you are able to boot into the BIOS, go ahead and do so.
  2. Remove the CMOS battery from the motherboard. Unplug your computer and open your computer’s case to access the motherboard.
  3. Reset the jumper.

What is hp BIOS application error 501?

You may have get a ‘BIOS Application Error 501’ error message if using not HP Preload image and press INFO button when starting unit. The HP BIOS application selected is corrupt or missing. Please install the application and try again.

What is error 501 HP EliteBook notebook PC series?

HP EliteBook Notebook PC Series – BIOS Application Error (501) Information. You may have get a ‘BIOS Application Error 501’ error message if using not HP Preload image and press INFO button when starting unit. The HP BIOS application selected is corrupt or missing.

What to do if the HP BIOS application selected is corrupt?

The HP BIOS application selected is corrupt or missing. Please install the application and try again. This error is the result of using the INFO button launch HP EFI Application and if not using HP Preload image, the operating system cannot find the EFI partition.

Why do I get’BIOS application error 501’error message?

You may have get a ‘BIOS Application Error 501’ error message if using not HP Preload image and press INFO button when starting unit. The HP BIOS application selected is corrupt or missing.