What size is L44649 bearing?

Product Description. This L44649/L44610 taper roller bearing is made of chrome steel, is unsealed, and has a steel cage. It has a 1.0625″ inside diameter, a 1.98″ outside diameter, and a 0.56″ depth.

How do you match bearings?

Select a bearing that matches the dimensions of the shaft or housing from the bearing boundary dimensions table. Check that the type of bearing you have selected is appropriate by using the “Performance comparison of bearing type” with the bearing usage criteria.

What does 2AS mean on a bearing?

Shell Alvania 2S
2AS (Shell Alvania 2S), 5K (Kyodo Yushi Multemp SRL) and 3AS (Shell Alvania 3S) are considered NTN standard greases. L627 (Mobil Polyrex EM) is the current standard grease for most aftermarket inventory. 5K is the standard for micro-size bearings. 3AS is the standard in bearing units.

Where are Bower bearings made?

Bower tapered roller bearings are shipped from Bower plants located in Macomb, IL and Hamilton, AL, and enjoy a reputation for reliability and performance in the no-nonsense world of big rigs and other hard working vehicles.

What size bearing is L68149?

The inner diameter of bearing # L68149 is 1.378 inches. Both fit on a #84 spindle.

What size is a l44643 bearing?


d 25.4 mm Bore diameter
D 50.292 mm Outside diameter
T 14.224 mm Total bearing width
d1 ≈ 39.6 mm Inner ring shoulder diameter
B 14.732 mm Width inner ring

How do you know which bearing to use?

When choosing a bearing, you must consider several important factors. The first factor to consider is the load that the bearing can support. Each type of bearing is specifically designed to support an axial or radial load. Some bearings can support both loads: in this case we refer to a combined load.

What is the meaning of C3 in bearing?

Internal clearance being C3 means that the bearing has room for expansion if needed between the races of the bearing, whilst holding the outer ring and moving the inner ring in a radial movement you will detect a little amount of play between the two rings.

What does Llu mean in bearings?

Double-lip contact rubber seal
LU, LLU: Double-lip contact rubber seal.

Where are BCA bearings made?

The majority of our loose and tapered bearings are produced in one of two plants; Hamilton, Alabama or Macomb, Illinois.

Are NTN Bearings good?

In testing the NTN bearings are generally the best irrespective of which seal is put on them. Their technical support is also very good (especially in the UK). The vast majority of NTN’s 6000 series bearings are made in Japan and they are sticklers for quality control.