How do I Unbrick my router?

Unplug the router. Wait for 30 seconds and plug it back in. Wait another 30 seconds for the router to boot up. Press and hold the reset button using a paperclip inserted into the location for hard resets, typically a small hole on the side or back of the router, for 30 seconds.

How do I reset my DrayTek 2960?

How to reset the Vigor 3900 / 2960 to Factory Default settings

  1. Back up the existing configuration on the router if required – this is done from [System Maintenance] > [Configuration Backup] by clicking the Backup button.
  2. Press the Factory Reset button on the front of the router for 5 seconds.

How do I use website firmware recovery if the router becomes brick?

How to use webpage firmware recovery if the router become brick

  1. Download the latest firmware version for your device from our official website, please go to Download Center ).
  2. Connect the PC to one of the router’s LAN (yellow) ports.
  3. Check the IP address on your PC.

How do I reset DrayTek?

The quickest way to reset the router is to select ‘reboot’ from the web configurator, and click the button for ‘factory defaults’. On the 2200/2600 series, you can instead press the reset button the the back of the router and hold it until the left-hand LED starts to flicker rapidly, then release the button.

How do I factory reset my DrayTek 2862?

Log into the router’s web management page, and go to System Maintenance >> Reboot System. On the web page, choose “Using factory default configuration” and click Reboot Now.

Where can I find the Draytek firmware upgrade utility?

The DrayTek Firmware Upgrade Utility is a DrayTek specific TFTP utility designed for use with DrayTek routers, it can be found on the router’s Manual / Router Tools CD or can be downloaded from the DrayTek UK Downloads page. Step 1.

How do I restore my DrayTek router to a working state?

If a DrayTek router is in an inoperable state either due to a failed firmware reflash or any other reason, the router can normally be restored to a working state if it can be manually put into the router’s TFTP (T rivial F ile T ransfer P rotocol) mode-this is a function separate from the router’s firmware that makes it possible to reflash th…

How do I restore my vigor 2960 or 3900 router to normal?

If your Vigor 2960 or 3900 router is not operating normally, then it is very likely that it can be successfully returned to normal operation by performing a firmware upgrade, using the DrayTek Firmware Utility. The DrayTek Firmware Upgrade Utility is a DrayTek specific TFTP utility designed for use with DrayTek products.

How do I contact DrayTek outside of the UK/Ireland?

If you are outside of the UK/Ireland, please contact your local supplier, the local support resource in your country or use the DrayTek International site instead