What is Dell EMC SAN?

Dell EMC sells data storage, information security, virtualization, analytics, cloud computing and other products and services that enable organizations to store, manage, protect, and analyze data. Dell EMC’s target markets include large companies and small- and medium-sized businesses across various vertical markets.

What is SAN and NAS in networking?

NAS is a single storage device that serves files over Ethernet and is relatively inexpensive and easy to set up, while a SAN is a tightly coupled network of multiple devices that is more expensive and complex to set up and manage.

Is SAN a storage or a network?

SAN Definition A SAN (storage area network) is a network of storage devices that can be accessed by multiple servers or computers, providing a shared pool of storage space. Each computer on the network can access storage on the SAN as though they were local disks connected directly to the computer.

How do I log into Dell EqualLogic SAN?

You can access Group Manager’s graphical user interface (GUI) from any web browser with access to the EqualLogic SAN….Log In to the Group Manager GUI

  1. In your web browser, type the group IP address.
  2. Enter the account name.
  3. Enter the password that was specified when the account was created.

What is Dell EMC storage array?

Dell EMC XtremIO X2 An all-flash system, the XtremIO X2 is a Dell storage array that is based on flexible scaling options. The X2 platform brings storage efficiency, agility and performance. It falls into these categories: Enterprise Storage. All-Flash Storage.

Where is SAN network used?

SANs are primarily used to access data storage devices, such as disk arrays and tape libraries from servers so that the devices appear to the operating system as direct-attached storage. A SAN typically is a dedicated network of storage devices not accessible through the local area network (LAN).

What is IP SAN storage?

An IP SAN is a Storage Area Network that uses the iSCSI protocol to transfer block-level data over a network, generally Ethernet. Initiator. In this document the term “initiator” is used interchangeably to refer to a server, host or device driver that initiates (i.e. begins) iSCSI command sequences.

How do I create a SAN storage area network?

Configuring SAN storage

  1. Configure the SAN to create the LUNs to be used by queue managers, and allow access from the appliance host bus adapters.
  2. Define a volume for each LUN, using the LUID to identify it.
  3. Initialize the file system for the volume.