What psi should I set my rear shock to?

The exact PSI you end up with depends on how plush/firm you want the rear shock to be, but a good starting point is 1 psi for 1 lbs in weight of the rider (including riding gear).

How do you pump up a FOX 32 forks?

Setting Fork Air Pressure

  1. Unscrew the blue air cap on top of the left fork leg counter-clockwise to expose the Schrader valve.
  2. Attach a FOX High Pressure Pump to the Schrader valve.
  3. Pump your fork to the appropriate pressure as listed in the ‘Suggested starting points for setting sag’ table below, then remove the pump.

How much air do I put in my fox DPX2?

3. Do not exceed maximum air pressure: FLOAT DPS and DPX2 air shocks have a maximum air pressure of 350 psi. 4. Remove the pump.

How many spacers does Fox FLOAT X2 have?

2019-2020 FLOAT X2 Air Spring Tuning with Volume Spacers

Shock Size Maximum Spacer Pair Quantity
8.500 x 2.500 3
8.750 x 2.750 3
9.500 x 3.000 4
10.500 x 3.500 5

How do you set fork air pressure on a 32 float?

Setting Fork Air Pressure. 32 FLOAT maximum air pressure is 125psi. Unscrew the blue air cap on top of the left fork leg counter-clockwise to expose the schrader valve. Attach a FOX High Pressure Pump to the schrader valve.

Why does my 32mm float Fork look different than shown?

As many 32mm FLOAT forks have been built with slightly different internal air spring systems, your fork may appear different than that shown.

How do I adjust the Fox fork lockout force?

To protect your fork’s internal parts, your FOX fork will “blowoff” when it encounters an intense hit. You can adjust when the fork blows off—lockout force—by adjusting the black knob on the right-side top cap.

How do I adjust the SAG on my Fox Racing Shox?

Generally, sag should be set to 15 – 25% of total fork travel. Unscrew the blue aircap on top of the left fork leg to expose the Schrader valve. Attach a FOX Racing Shox High Pressure Pump to the Schrader valve. Pump your fork to the appropriate setting from the Suggested Air Spring Pressure Settings table below, then remove the pump.