Why will my LG front load washer not spin?
A broken drive belt is one of the most common part failures that results in an LG front load washer not spinning. The drive belt is suspended around the wash tub via two pulleys, using power from the washer’s motor to spin the wash tub. Over time, this rubber belt can tear and break, leaving the tub unable to spin.
How do I force my LG washer to spin?
To activate the spin only feature on your LG top load washer, press the Special Use selection button. And choose spin only. At this time selected the desired spin speed by pressing a spin speed selection button. Note that the no spin option is not available for top-load washers.
How do you troubleshoot and repair an LG washer that stops at the rinse spin cycle?
Draining problems in LG washers stem from clogged drain filters….Unclog the drain filter and your washer will cease to stop at the rinse and spin cycle.
- Find the filter door on the bottom left of the appliance.
- Flip open the filter door.
- Pull the drain hose out and insert it into a pan or a bucket.
How do I force drain my LG front load washer?
To drain the water from the washer, power the machine on and press the spin speed key until no spin is selected. One minute of estimated time will be displayed on the clock, the unit will drain out the water, and the cycle will end.
How do I reset my LG front-load washer?
How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
Why is my LG machine not spinning?
Another cause for an LG washer not spinning is a worn out clutch. This component connects the transmission and inner wash tub, enabling the tub to gradually increase its spin speed as needed. Over time the clutch can wear out and when this happens your LG washer won’t spin.
Is there a reset button on LG front load washer?
How to reset the washing machine: Press POWER to turn the washer off. Unplug the washer from the power outlet or turn the circuit breaker to the unit off. With the power disabled, press and hold the START/PAUSE button for 5 seconds.