How do you add a thread dimension in Solidworks drawing?

Click Smart Dimension (Dimensions/Relations toolbar) or Tools > Dimensions > Smart. Select the two silhouette edges of the cosmetic thread. The pointer changes to when it is over a silhouette edge of a cosmetic thread. Click to place the dimension.

How do you dimension a tapped hole in Solidworks?

Click the edge of a hole, then click in the graphics area to place the hole callout. A Hole Callout is inserted and the Dimension PropertyManager appears. The callout contains a diameter symbol and the dimension of the hole diameter.

How do I change the hole specification in Solidworks?

In Tools > Options > Hole Wizard/Toolbox, you can choose between two options for size matching: Preserve settings for each Hole Wizard hole type uses legacy behavior to save settings for each hole type.

How do you annotate threads in Solidworks?

On a cylindrical feature (a boss, a cut, or a hole), select the circular edge where the thread begins. Click Cosmetic Thread (Annotation toolbar), or click Insert > Annotations > Cosmetic Thread.

How do you measure a screw thread?

How to Measure Screw Thread Size

  1. Measure screw diameter, or screw size, by measuring the width of the threaded part of the screw. This corresponds to the first number of the thread size.
  2. Measure thread spacing. This corresponds to the second number of the thread size.

How do you specify a tapped hole in drawing?

The symbol for a tapped hole depends on the standards used. For metric holes, the diameter symbol is replaced with an ‘M’. For example a tapped hole for an M8 bolt would be ‘M8’.

How do you annotate threads in SOLIDWORKS?

How do you add screw holes in Solidworks?

Create a part, select a surface, and click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard . You can also open the Hole Wizard Type PropertyManager from an assembly.

How do you change the Hole Wizard in Solidworks?

Hole Wizard/Toolbox Options

  1. Click Options on the Standard toolbar, or click Tools > Options.
  2. On the System Options tab, click Hole Wizard/Toolbox.

How do you do callout threads?

Here are the five steps to interpreting thread callout:

  1. Look at the numbers in the callout.
  2. Understand the first number in the callout – This indicates the major diameter.
  3. Understand the second number in the callout – This indicates the distance between threads.
  4. Read the length – This is the number that follows the x.