How do you adjust the damper on a Whitfield pellet stove?
Loosen the set collar on the damper rod and pull the damper out. Do this 1/4″ at a time. Tighten the collar at its new position (1 3/4″ – 2″). After making any adjustment to the damper set collar, pull the damper rod out fully and re-check the dimension between the stove side panel and the inside if the set collar.
Why is my pellet stove not getting hot?
Answer: If your pellet stove it not producing enough heat it may mean that the blower needs to be cleaned or the intake might be blocked. This could also mean that the heat exchangers are being insulated from the airflow by a covering of ash and need to be cleaned.
What setting should I run my pellet stove on?
It is best to run the appliance on the lower heat settings like 2 or 3 rather than up at 4 or 5. The higher heat settings result in lower efficiency and the appliance cycling from high to pilot fire too often.
How do I make my pellet stove burn hotter?
5 Ways To Get More Heat From A Pellet Stove
- Burn high quality pellets low in ash and moisture content.
- Increase the heat output setting on the stove.
- Increase the blower speed on the stove.
- Adjust the airflow in and out of the stove.
- Clean the stove regularly in line with the manufacturer’s guidelines.
How high should the flame be on my pellet stove?
4′-6”
Once the feeding of pellets is re-established and the stove is running on High, the flame should rise to 4′-6” above the top of the firepot.
How do I maximize my pellet stove heat?
What happened to Whitfield pellet stoves?
In 2012 Lennox Hearth Products was sold to Comvest, and investment firm, and merged with Innovative Hearth Products, which became the company’s name in 2014. The Whitfield line of pellet stoves was discontinued in 2014.
Can you still get parts for Whitfield pellet stoves?
Most parts are still available direct from the factory. If you can not find the part you are looking for please call, e-mail or fill out our Parts Request Form and we will be happy to assist you.
How high should the flame be in a pellet stove?
Once the feeding of pellets is re-established and the stove is running on High, the flame should rise to 4′-6” above the top of the firepot.
What is the best small pellet stove?
Pellet Stove HP22 by Comfortbilt.
What are the advantages of a pellet stove?
Efficient|Wood pellets are an efficient source of heat because they contain very low levels of moisture and ash,when compared to woodchips or cordwood.
What are pellet stoves used for?
The fuel pellets are made from sawdust,so no new trees need to be cut down;
How to vent a pellet stove through a masonry chimney?
Taking the flue to a suitable distance above the roof line.