How do you reset a Haier washer dryer combo?

Turn the machine off at the powerpoint, wait for one minute, and then turn it back on. If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds.

How do you remove lint from Haier washer and dryer?

1.To remove the lint filter, first press the elastic piece at the upper end of the filter to release the tab from the filter cover, then pull outward. Pull the lower end of the lint filter rear cover outward to separate it from the lint filter front cover. Remove lint completely by rinsing with clear water.

How does a Haier washer dryer work?

The fan and heating element create heat and airflow. The heated air is passed from the front of the drum. As the air moves through the drum, the tumbling action and the temperature imbalance causes the moisture from the clothes to be attracted to the cool heat exchanger coil.

What are the 3 drawer for in a washing machine?

1 Main wash compartment: Detergent for the main wash, water softener, pre-soaking agent, bleach and stain remover. 2 Softener compartment: Fabric softener (do not fill higher than the line indicated by MAX). 3 Prewash compartment: Detergent for prewash or starch.

Where do you put the detergent in a washer dryer combo?

Add the manufacturer’s recommended amount of liquid detergent to the top of the load once all of the clothes are loaded into the wash basket. You can also use part of the measured amount to treat stains before washing.

Can you use detergent pods in washer dryer combo?

Single use laundry detergent pods are designed to be used in full size washers. The amount of water used and load size make using single-use detergent packages both inefficient and wasteful. Using them in a combination washer dryer might also introduce excessive suds. Powered detergent is recommended.

Do combo washer dryers have lint traps?

LG combo model do not have a lint filter that requires cleaning. This is because of the nature of how the unit dries versus a standard dryer. You may want to check the drain pump filter more often as lint may start to accumulate in this area.

What is tub dry in Haier washing machine?

If TUB DRY program is selected, the water level will not respond. During operation of wash , rinse and soak program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water.