How do you use por 15 fuel tank sealer?
Pour the entire bottle of POR-15 METAL PREP into the tank. Roll the tank around to ensure it coats all surfaces. Place the tank in different positions every half hour until the entire inside of the tank has been treated with POR-15 METAL PREP.
How long does POR-15 tank sealer take to dry?
Cure Time: Let POR-15® Fuel Tank Sealer cure for at least 96 hours (4 days) before returning to service. Drain all fuel from tank, remove tank from vehicle, and clean out tank. All fuel tanks are dirty and have to be cleaned out before sealing. DO NOT MIX THIS SEALER WITH ANY FUELS.
How much POR-15 gas tank sealer do I need?
Their website says 1 quart will do a 25 gallon tank. But if it is not very flat, ie. A very contoured body, I would get an extra half pint, you only get one shot. You cannot apply it over itself, once dry.
Does POR-15 tank sealer work?
I have used POR 15 product to repair some fuel tanks and it does work. Making sure the tank is clean and properly prepped is very important. After following the prep instructions POR recommends pouring the entire can of sealer in the tank and rolling around to coat the interior.
How long does gas tank sealer take to dry?
Open all tank openings to allow the best air flow. Air dry for 8 to 24 hours. When cured there will be no solvent smell left in the tank. If the coating is not completely cured before fuel is added the curing process will be stopped.
How do you use fuel tank sealer?
Pour contents into tank and “slosh” around. Let it sit for 5 minutes on each surface. “Slosh” around again until all fuel varnish is removed then pour out contents.
How much does a quart of por-15 cover?
96 square feet
POR-15 forms a rock-hard coating that won’t crack, chip, or peel, and it gets stronger when exposed to moisture. One quart will cover 96 square feet. coats including lacquer-based paints.
How do you keep a gas tank from rusting after cleaning?
The only way to prevent rust inside the tank is to coat it with a tank sealer.
How do you use a gas tank sealer?
Pour contents into tank and “slosh” around. Let it sit for 5 minutes on each surface. “Slosh” around again until all fuel varnish is removed then pour out contents. Thoroughly rinse with water from running garden hose.
Does fuel tank sealer work?
The fuel tank sealer does much of the work for you, working its way into seams and sealing pin holes. If the tank is suffering from more significant holes or cracks, either welding or sealing them externally with an epoxy repair filler may be required before applying the sealer.
Does gas tank sealer work?
Let patched area dry until the area is dry to the touch with a slight finger drag before pouring the remain- ing POR-15 Fuel Tank Sealer into the tank. If you are just patching and not sealing the entire tank let the patched area dry for 96 hours before adding fuel to the tank.
What is Por 15 sealer used for?
POR-15 Fuel Tank Sealer POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content. POR-15 Fuel Tank Sealer has superior strength and fuel resistance.
Can you use por 15 on a fuel tank?
POR-15 Fuel Tank Repair Kit is more than just pouring in a quart of sealer and sloshing it around. If gum, varnish, sludge, or fuel are inside, they must be removed first. Our POR-15 Fuel Tank Sealer, like all other sealers, will not work in a contaminated tank.
How do you clean the inside of a por 15 tank?
Mix your 1st quart of POR-15 CLEANER DEGREASER with 1 quart of WARM water. Extremely hot water could melt the adhesive on the duct tape. Pour the mixture into the tank, shake vigorously, and “roll” the tank around to ensure the cleaner gets to all inside surfaces for a minimum of 30 minutes.