How much boost can stock injectors hold?

Registered. Stock injectors can hangle about 200whp. Depending on base fuel pressure. If your running a FMU then you might beable to squeeze a little more out of them.

How much boost does a stock SR20DET make?

The W10/W11 Avenir AWD SR20DET commonly swapped into the FWD B13/B14/P10/P11 chassis also has a stock wastegate actuator with a 7lbs spring inside, but is boost controlled from the factory to . 65bar (9.4psi) IIRC.

How much boost can 550cc injectors handle?

dbrass240 wrote: 550cc injctors are really only good to 350whp. thats it. too much fuel can be hard to manage as well…

How much boost can a vg30 handle?

How much boost can a stock vg30e handle? It can be anywhere from 5 to 15 pounds w/ pump gas.

How much power can a stock SR20DET handle?

ok so 15-17 psi on a sc34 or garrett t3/t4 60 trim 550cc on 93 oct gas is around the limit on a stock sr20det.

How much horsepower does a stock SR20DET have?

Both are naturally aspirated engines producing 140 hp (100 kW) and 155 hp (116 kW) respectively. SR20DET engine swaps are becoming more commonplace due to the forced induction aftermarket additions available for the SR20DET.

How much horsepower is 550cc?

550 cc injectors will support about 500 bhp and maybe a bit more if you tweak the fuel pressure.

How much power can a stock 300Zx handle?

How Much Boost Can A Stock 300Zx Tt Handle? Stock Turbos should last until 18 psi for a long time. If you use a new ecu (that’s called stage 3) and stock injectors, you can boost your engine’s power to 400hp. If you have 550cc injectors and an 18psi tuning rate, you’ll be able to generate over 400hp.

How much HP can a stock SR20DET make?

I would say in the range of 18lbs is more reasonable for a stock SR given that it is tuned correctly. I think what you should be asking is, how much horsepower can a stock sr20det make? Max boost varies from turbo to turbo on any engine. As in horsepower numbers on stock sr block at least is 520+ whp from phase2.

How much boost is safe for a stock SR?

Stock Boost: 7 psiSafe Boost: > 15 – 18 psi After that The Turbo is past it’s efficiencyMax Boost: 20 psiHP Ratings: Approx. 300 RWHPType of Bearings: Ball Bearing without a headgasket upgrade, I wouldn’t push it past 20lbs of boost. I would say in the range of 18lbs is more reasonable for a stock SR given that it is tuned correctly.

How much HP is Max boost on a turbo?

Max boost varies from turbo to turbo on any engine. As in horsepower numbers on stock sr block at least is 520+ whp from phase2. now thats exactly what i was asking for….thank you very much…