What can I use to hang up a whiteboard?

You can hand your whiteboard by screwing it directly into the wall, using temporary hooks, or applying industrial-strength sticker patches. If you decide to hang your whiteboard with screws, you’ll need to drill holes through your whiteboard and find studs in your wall to screw the board into.

How do you hang a whiteboard on a wall without drilling?

You can hang whiteboard with industrial strength velcro. I buy the role at Home Depot that is rated to hold 10 lbs. Because it is attaching to the wall, there is not 10 lbs of weight actually on the velcro strips. I put them on every corner and one in the center top and bottom and left and right.

How do you hang whiteboard panels?

Mounting the boards

  1. Before you start, put a washer on each screw that you are going to use so that you are ready to go.
  2. Apply double sided mounting tape to the edges of the panel board.
  3. Peel the backing off the mounting tape and put your panel in the correct place.

Can I hang a whiteboard with Command Strips?

Answer: I hung a 36 x 48 size dry erase board with the command strips that are the hook and loop style for hanging up picture frames. I used the medium size strips and put 2 on the top and 4 on the sides. Holds it perfectly no problem.

How do you hang a whiteboard on a cubicle wall?

Some partition hangers may instead come with mounting screws or very strong tape that allows you to affix them to the board. After the partition hangers are affixed, secure them to your cubicle by positioning the top bracket over the top of your cubicle, allowing the whiteboard to hang down.

How do you hang a board without nails?

No Nail, No Fail Options

  1. Command Strips. This is probably the most commonly used method of hanging up frames, canvases, and any other decor without leaving a trace on the wall.
  2. Command Hooks.
  3. Hang Art From Your Molding.
  4. Use Your Mantle.
  5. Take Up Space on Bookshelves.
  6. Embrace the Wall Lean.
  7. Put the Art on an Easel.
  8. Clip it Up.

How do you hang things on a cubicle wall?

Use cubicle wall hangers Similar to over-the-door wreath hangers, they are metal pieces that hang from the top of the cubicle wall and drop down several inches, providing a hook that can be used to hang jackets, earphones or even frames. Most frames have a slit in the back where you can insert the metal hook.

How do you attach a dry erase board to a cubicle?

If you were going to use these hangers to hang a whiteboard which are definitely a great option, you would simply slide the hangers to match the placement of the rungs that are on the back of the whiteboard. Then you will end up with a secure whiteboard hanging on your cubicle wall.

Can I hang a whiteboard with Command strips?

How do you hang up a board?

How to Hang a Bulletin Board

  1. Hold your bulletin board up against the wall in the spot where you want to mount it.
  2. Make a pencil mark on the wall just above the top of the board.
  3. Wipe the wall with a clean towel to remove dust.
  4. Remove the paper liner from the back of the hook.

How much weight can a cubicle wall hold?

Press firmly. The maximum frame or poster weight recommended is 2 1/4 lbs which should satisfy most of your needs as far as posters, pictures, and frames are concerned.