Why is my Silverado cruise control not working?

The most common reasons a Chevrolet Silverado 1500 cruise control isn’t working are failed control module, sensor or switch issues, or throttle actuation problems.

Why does my cruise control not work on my 2008 Chevy Silverado?

Check for a blown fuse or burned-out brake light. If the brake lights are fine, check the trailer brakes (if you have one). Rusty tail light sockets could cause it as well. The vehicle speed sensor can stop the cruise from working, so check this one as well.

Why would cruise control stopped working?

A blown fuse is the simplest to explain. If the fuse of your cruise control is bad, the cruise control won’t work. If the speed sensor or speedometer isn’t working, the cruise control won’t work either, since this feature is partially responsible for making the cruise control function properly.

Where is the cruise control fuse on a 2009 Chevy Silverado?

The 2009 Chevy silverado cruise control fuse is located in your vehicle’s underhood fuse panel.

Where is the fuse for cruise control?

You can easily find out where your cruise control fuse is and what it’s called in your owner’s manual. But most often, you’ll find the cruise control fuse box under the dashboard on the driver’s side.

How do you test a cruise control switch?

To test this, simply start your engine and press the “on” button on your cruise control switch. If the cruise control light illuminates on your dash or instrument cluster, the switch should be working fine.

Where is the fuse for cruise control on a 2010 Silverado?

The fuse box is near the front end under the hood on the right (driver’s left) side. To turn on the system, You will use the buttons located on the left side of the steering wheel. You’ll first need to press the ON button then accelerate to Your desire speed.

How do I know if my cruise control switch is bad?

If you use cruise control and the light doesn’t illuminate or the car cannot maintain a set speed, you may have to replace the cruise control switch.

Where is the fuse box on a 2008 Silverado?

Fuse box location It is located on the driver’s side of the instrument panel, behind the cover.

How do I fix my cruise control fuse?

Follow these easy steps to fix a blown fuse:

  1. Unplug electrical appliances. First and foremost, it’s important to identify where the outage occurred.
  2. Turn the power off. Next, you will need to turn off the main power to the fuse box.
  3. Find the fuse box.
  4. Identify the broken fuse.
  5. Replace the fuse.
  6. Test your new setup.

How do you diagnose a bad cruise control?

A quick way to diagnose this is to try holding the brake pedal up with the top of your left foot at the same time as you are engaging the cruise control while on a test drive. If the cruise control tries to set, then the brake switch will most likely need to be adjusted. Adjustment of the brake switch is very common.