Can you delete Linux swap partition?
To disable the swap partition, open /etc/fstab as root and remove the line pertaining to your swap partition. Then, run sudo swapoff /dev/sda1 or whichever sdx# your swap partition is on.
How do I delete a partition in GParted?
Open GParted, either from a desktop menu or by typing gparted at the command line and pressing Enter. GParted displays the partitions that it detects on your computer, both as a graph and as a table. Right-click the Fedora partitions, then select Delete.
How do I replace RAID 1 drive in Linux?
How to: Replacing a failed drive in a Linux Software RAID1 configuration (mdraid)
- Step 1: Identify the faulty drive and array. Identify which RAID arrays have failed:
- Step 2: Remove the failed partition(s) and drive.
- Step 3: Adding the new disk to the RAID arrays.
- Step 4: Install GRUB to the new hard drive MBR.
How do I delete a swap partition?
In simple ways or the other step:
- Run swapoff -a: this will immediately disable the swap.
- Remove any swap entry from /etc/fstab.
- Get the system rebooted. Ok, if the swap is gone.
- Repeat steps 1 and 2 and, after that, use fdisk or parted to delete the (now unused) swap partition.
Can I delete swap?
Edit the /etc/vfstab file and delete the entry for the swap file. Recover the disk space so that you can use it for something else. If the swap space is a file, remove it. Or, if the swap space is on a separate slice and you are sure you will not need it again, make a new file system and mount the file system.
How do I delete a RAID partition?
How to delete RAID array with CTRL + i
- Turn on the computer.
- Use the up or down arrow keys to select “Delete RAID” Volume.
- Use the up or down arrow keys to select the RAID volume.
- Press Delete to delete the volume.
- Press Y to confirm the deletion.
How do I remove a RAID 0 drive?
mdadm: How to Remove a Drive From a RAID Array
- Summary. sudo mdadm –detail /dev/md1.
- Get Array Details.
- Unmount the RAID Array.
- Stop the Array.
- Remove the Drive using mdadm.
- Zero the Superblock on the Removed Member Drive.
- (Optional) Change the Number of Devices for the RAID Array.
- Restart the Array.
How do I merge partitions in GParted?
Step 1. Right-click the target partition and choose “Merge Partitions”. Step 2. Tick the unallocated space and click “OK”.
How do I replace a RAID 1 hard drive?
To replace a disk for a Bootable RAID 1 Configuration After confirming the channel number, shut down the system. Next, remove the disk from corresponding channel/port of the RAID Controller card and replace it with a new disk. 4. Once the disk has bene replaced, power on the system.
How do I change RAID drives?
About This Article
- Back up your current drive.
- Make recovery media.
- Purchase the right hard drive.
- Shut the computer down and remove the case.
- Remove the hard drive.
- Insert the new drive and put the case back on.
- Boot the computer back up with the recovery media inserted.
- Reinstall Windows and restore from backup.