How do I connect my iHome Speaker clock?
Press and hold the Bluetooth Pairing Button on the back of the unit for 2 seconds. The unit will beep and the Bluetooth icon will flash on the display, indicating the unit is in pairing mode. 3. “iHome iBT22” should appear in your device’s menu.
How do I reset the clock on my iHome speaker?
To do so, turn the unit ON and press the end of paperclip or similar into the reset port on the back of the unit for less than 2 seconds to reset it without clearing Bluetooth settings. The unit will reset and power back on. (If pressed for longer than 2 seconds, the unit will reset but will not power back on.)
How do I set the time on my iHome clock radio 29?
Press the Time Set/Sleep Button again. “CLOCK” will appear and the time will flash. Press the – or + Button to set the correct time (press and hold for rapid setting). Remember to set the correct AM or PM time.
How do I set the time on my iHome ipl24?
SETTING THE TIME MANUALLY Press and hold the Time Sync Button until “SYNC” flashes in the display and a beep sounds. Press the + or – Buttons so “MANUAL” appears in the display, indicating manual time setting mode. 2. Press and release the Time Sync Button.
How do you turn an iHome on?
Turn the device on and press play. Press the Power Button on the unit to turn it on. Adjust volume on your audio device and the unit as needed. Do not play an line-in audio device and a docked iPhone or iPod at the same time or you will hear both sources.
Why is my iHome speaker not connecting?
If your device does not auto-link when within range, re-pair the device. To do so, first delete this unit from your Bluetooth devices menu. Move the Power OFF/Bluetooth/Aux Switch on the unit to the Bluetooth position (center) to begin pairing. Make sure your device is working properly.
How do I set the time on my iHome clock radio idl43?
Response from iHome:
- Press and hold the Time Sync Button located on the top of the unit until “AUTOSYNC ON” or “AUTOSYNC OFF” flashes on the display,(if AUTOSYNC ON appears, press the + or – Button to toggle to AUTOSYNC OFF setting).
- Press and release the Time Sync Button.
- Press and release the Time Sync Button again.