How do you fix a fuser error on a Xerox printer?
Fault Code 010-397: Fuser Error
- Power off the printer, remove and reinstall the fuser, power the printer back on. Refer to steps to replace the fuser as reference but do not replace the fuser Replace the Fuser.
- If the problem persists, contact Support for additional assistance.
How do you fix a open fuser error?
Fault Code 10-100: Open Fuser Error Message
- Power the Printer Off, Wait 20 Seconds, Then Power On.
- Replace the Fuser (Contained in the Maintenance Kit)
What is an open fuser error?
This error displays because the Fuser Unit cannot maintain a normal operating temperature. Power the printer off and then on. If the problem persists, contact Support for additional assistance as the Fuser Assembly may need to be replaced.
How do you reset a fuser counter?
Reset the Fuser Counter:
- Log in as a System Administrator. See the Related Content for additional information.
- Press the Machine Status button on the Control Panel.
- Select the Tools tab on the Touch Screen.
- Select Troubleshooting.
- Select Resets.
- Select Supply Counter Reset.
- Select Fuser.
- Selection Confirm.
What is a fuser in a Xerox printer?
A fuser unit is a pair of heated rollers within the printer that fuses the toner onto the paper being printed on. Toner particles are pulled to the paper to create the desired text and images as the paper passes the imaging drum.
What is a fuser unit in a printer?
The fuser unit fuses the transferred toner image onto paper with heat and pressure. It is located on the inner back side of the device.
What is a fuser on a Xerox copier?
How do you know when a fuser is bad?
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.