What does no more problems do?

A: No Mor Problems is a patented algaecide that kills algae by activating chlorine in water. When chlorine is added to water it often reacts with things more than just algae. This locks up the chlorine in unusable compounds and reduces its ability to kill algae.

How do you use United Chemical No Mor problems?

For every 5000 gallons of pool water, add 3 fluid ounces of No Mor Problems® DIRECTLY to the pool water. For every 5000 gallons of pool water, add a chlorinating product to the pool water as directed by the label of an EPA registered chlorinating product.

What is the best pool chemical to clean?

1. Chlorine Tablets. One of the best sanitizers for any swimming pool is chlorine, and it’s a highly-effective way to not only keep your water clean and clear, but the walls, floor, and surrounding area, too.

Is no more problems an algaecide?

No Mor Problems is an EPA Registered patented preventative algaecide that will give you a crystal clear swimming pool all season long. More than just a preventative, No Mor Problems makes sure that you spend less time cleaning your pool, and more time enjoying it.

How fast does pool clarifier work?

two to three days
A clarifier requires less work and less water but can take to two to three days to achieve the results you are looking for.

What happens if you put too much clarifier in a pool?

What happens when you add too much clarifier is that all the little particles clump together too much an end up as a colloidal suspension. When that happens, the whole thing turns cloudy. It’ll clear but it will take a while. Run the filter 24/7 until is clears.

Can I put clarifier in with shock?

It’s not a good idea to use pool shock at the same time as clarifier. Some clarifiers are polymer based and the shock can act to break up the polymer causing the clarifier to be ineffective. It’s best to shock your pool before and wait a day or two before adding clarifier.

Does baking soda make pool water clear?

Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.

How do I make my pool water sparkle?

Five easy steps to a sparkling clean pool

  1. Circulate the water. Pool chemicals need to be evenly distributed if they are going to work most effectively.
  2. Clean the filter. The filter is one of your pool’s most important components.
  3. Brush and vacuum.
  4. Test the water.
  5. Use the right products.

How do you use No mor problems in a pool?

Always add No Mor Problems® directly to the pool or spa. Note: This product is for prevention only. To remove algae, use one of our “Treat” algaecides before this product. For every 5000 gallons of pool water, add 3 fluid ounces of No Mor Problems® DIRECTLY to the pool water.

How much chlorine do you put in your pool to clean it?

A very small amount will get rid of algae growth and water cloudiness. My pool gets over 90 degrees in summer and algae begins even with heavy chlorine. A few ounces a week of no-mor problems clears everything up and keeps it that way.

Can you put bromine in pool water?

Use No Mor Problems® when adding chlorinating or brominating products directly to the pool water. Use the recommended dosage rate of an EPA Registered chlorinating or brominating product. every pound (dry) or gallon (liquid) chlorinating product.

Can dogs drink no Mor problems pool water?

No Mor Problems® is safe for pets that like to drink pool water (and swimmers too). It is a violation of federal law to use this product in a manner inconsistent with labeling. Always add No Mor Problems® directly to the pool or spa.