## Can AND gate have 4 inputs?

Like the AND gate, the OR function can have any number of individual inputs. However, commercial available OR gates are available in 2, 3, or 4 inputs types. Additional inputs will require gates to be cascaded together for example.

### What is the truth table for AND gate?

The table used to represent the boolean expression of a logic gate function is commonly called a Truth Table. A logic gate truth table shows each possible input combination to the gate or circuit with the resultant output depending upon the combination of these input(s).

#### How many truth table entries are there for 4 inputs?

16 truth table entries

How many truth table entries are necessary for a four-input circuit? Explanation: For 4 inputs: 24 = 16 truth table entries are necessary.

**Can AND gate have multiple inputs?**

The AND Gate If any input(s) is “low” (0), the output is guaranteed to be in a “low” state as well. In case you might have been wondering, AND gates are made with more than three inputs, but this is less common than the simple two-input variety.

**How does a AND gate work?**

An AND gate is a logic gate having two or more inputs and a single output. An AND gate operates on logical multiplication rules. In this gate, if either of the inputs is low (0), then the output is also low. If all of the inputs are high (1), then the output will also be high.

## What is the operation of AND gate?

AND gate in Electrical Engineering An AND gate has two or more inputs and one output, and if the inputs applied to it are all 1, then the output will be 1. An AND gate is an electrical circuit that combines two signals so that the output is on if both signals are present.

### How is an AND gate made?

A simple 2-input logic AND gate can be constructed using RTL Resistor-transistor switches connected together as shown below with the inputs connected directly to the transistor bases. Both transistors must be saturated “ON” for an output at Q.

#### How many entries will be in truth table of a 4 input AND gate?

So, a 4-input AND gate has 16 possible combinations, 5 inputs would be 32 outputs, and so on.

**How many combinations of 4 Boolean are there?**

Each of four inputs may be a 1 or 0, making 2^4 = 16 total input combinations.