How do I hook up my Blu-ray DVD player to my TV?

Connect the Blu-ray Disc Player to Your TV

  1. Using a high-speed HDMI® cable, connect one of the cable to the HDMI OUT on the Blu-ray Disc player.
  2. Connect the other end of the HDMI cable to the HDMI IN 2 or HDMI IN 3 on your TV.
  3. Turn on the Blu-ray Disc player.
  4. Turn on your TV.

How do you set up Blu-ray?

Blu-ray Disc player initial setup

  1. Make sure your Blu-ray Disc player is connected to your TV or Home Theater system.
  2. Turn on your TV or Home Theater system and make sure it ‘s set to the correct input to view the Blu-ray Disc player.
  3. Connect power to the Blu-ray Disc player using the supplied AC adapter.

Why is my DVD player not showing on my TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types.

Does Blu-ray require HDMI?

Even if your TV doesn’t have an HDMI port, you can still hook up your Blu-ray player/DVD player to get high-definition video and audio to your TV. Component cables also support 1080p HD signals, but the interface requires more cables than HDMI.

Why won’t my DVD play in my Blu-ray player?

There are several reasons a disc may not play in the Blu-ray player. A dirty or scratched disc is the most obvious cause, but an incorrect region code or configuration of your home theater system can be the reason as well. Whether you’re having trouble with 4K or 3D, Blu-ray or DVD, there is a fix.

Why is my Blu-ray DVD not working?

The Blu-ray disc tray may be damaged – If you have an ejectable disc tray, eject your disc and take care to observe any slow opening, wobbles, or misalignment. Try reseating the disc. Blu-ray cables may be loose – A loose connection or incorrect connection will prevent the video from being displayed.

Why does my DVD player not work?

Check if the optical disc drive is dirty or broken. Dust is always the culprit for most DVD player not read/load errors. … DVD player not working might be a sign that the disc tray, tray motor or laser is worn out. To fix any of the DVD hardware, you need to open the housing and check the inside with special tools.

Should I connect Blu-ray player to TV or receiver?

By far the most advanced method for integrating an Ultra HD Blu-ray player into your home theater is through the use of a surround receiver. With this configuration, you are using the receiver’s HDMI inputs to connect all of your source devices and route the output to your speakers and your television.