Lifehacks

What is the best vocal chain?

We’ll master it for you and send you a sample to review.

  • Insert 5: FabFilter Saturn 2, Saturation.
  • Insert 6: Seventh Heaven Pro, Room Emulation.
  • Insert 7: Oxford Inflator, Compression.
  • Send 1: Seventh Heaven Pro, Reverb.
  • Send 2: Arturia Memory Brigade, Delay.
  • Send 3: Antares Auto-tune, Vocal Tuning.

How do you mix female vocals?

To EQ female vocals, there are 3 general areas you want to look at: Add a low-pass filter up to 150-200hz, cut mud around 300hz, remove boxiness around 600hz, and consider adding shelving boost around 6k. If the vocal is too harsh, then add a multiband compressor to tame harshness around 800hz and 4khz.

What should be on a vocal chain?

When making a vocal chain, you’ll want to process in this order: tuning, equalization, compression, saturation, excitement, upward compression, and then reverb and delay sends. There are other chains of course, but I’ve found this to be a great starting point with an overall professional sound.

How much compression do you need for pop vocals?

A good place to start with pop vocals is a 5:1 ratio. Try a higher ratio (7:1, 8:1) for more heavily compressed vocals with minimal dynamic range, or a lower ratio (2:1, 3:1) for a more natural sound with some dynamics preserved.

What goes first EQ or compressor?

Each position, EQ pre (before) or EQ post (after) compression produces a distinctly different sound, a different tonal quality, and coloration. As a rule, using EQ in front of your compressor produces a warmer, rounder tone, while using EQ after your compressor produces a cleaner, clearer sound.

How do you EQ your voice?

Best EQ Settings for Vocals

  1. Roll off the low-end starting around 90 Hz.
  2. Reduce the mud around 250 Hz.
  3. Add a high shelf around 9 kHz & a high roll off around 18 kHz.
  4. Add a presence boost around 5 kHz.
  5. Boost the core around 1 kHz to 2 kHz.
  6. Reduce sibilance around 5 kHz to 8 kHz.

What frequency is a female singer?

165 to 255 Hz
The voiced speech of a typical adult male will have a fundamental frequency from 85 to 155 Hz, and that of a typical adult female from 165 to 255 Hz.

What goes first in a vocal chain?

Compression and EQ in your vocal chain The first processor in a vocal chain is usually a compressor or an EQ.

How do you start a vocal chain?

How to create a vocal chain from start to finish

  1. Applying a preamp. The first step in our vocal chain is pre-amplification.
  2. Applying compression. Next, we’ll use Arturia’s FET-76 emulation to apply some compression.
  3. Applying reverb.
  4. Applying delay.

What is the best vocal chain for hip-hop?

Vocal Chain for Hip-Hop / Rap A great hip-hop vocal sound features a rich low-end to convey a sense of power and a bright top-end to help the vocals cut through the mix. From Kanye West to Lil Wayne to Eminem, the Sony C-800G is the mic of choice for the world’s biggest rappers. However, with a $10k price tag, it may be difficult to justify.

What is a vocal chain and why do you need one?

A good vocal chain can help remove all the things you don’t want from the vocal and help place your vocal in the sweet spot in your mix. We’ve captured what we think really works in a vocal chain and layered these steps out below.

What is the best SSL channel strip for vocals?

The SSL channel-strip is somewhere in the middle with its signature midrange bite. The 1176 is an absolutely essential tool for tracking or mixing rock vocals, often used in conjunction with an LA-2A. For a more punchy, aggressive sound, try a snappy VCA compressor, like the dbx 160.

What is the best plugin to tighten up a vocal?

Next up is a personal favourite of mine the saturator! Here the Saturator adds a little bit more warmth and character to the vocal while also raising the overall volume of the vocal. To tighten up your vocal even more lets add in a Multiband Dynamics plugin, the preset “A Standard Multiband Comp” will work great.