Where is interVOLT made?

Australia
interVOLT products are designed, engineered and produced in Australia to cope with the demands of the harshest applications, particularly in high ambient temperature and high humidity environments.

How do I reset my interVOLT?

Disconnect both fuses. Replace MAIN battery fuse. Press and HOLD the OK button until you hear the audible beep to start programming.

Can Intervolt charge lithium battery?

Capable of charging a wide range of battery chemistry types including a specific curve for LiFePO4 Lithium batteries (with inbuilt battery management system).

What happens if you charge a lithium battery with a regular charger?

If you use a lithium charger on a lead-acid battery, it will supply a constant voltage to the battery for as long as it is able to. This could drain the cells below their usual capacity and shorten the life of the battery so it is not a good idea to try.

Can I join two battery boxes together?

To join batteries in parallel, use a jumper wire to connect both the positive terminals, and another jumper wire to connect both the negative terminals of both batteries to each other. Negative to negative and positive to positive. You CAN connect your load to ONE of the batteries, and it will drain both equally.

What is the difference between DCDC and BCDC Chargers?

A BCDC charger is a DCDC charger, the “BCDC ” is the start of the REDARC part number and means Battery Charger Direct Current , for example BCDC1225D. I trust this will point you in the right direction. If you have further queries, I recommend you call REDARC Technical Support on 08 83224848.

Why choose intervolt?

Consisting of specialised product for power conversion, control, conditioning and stabilisation – interVOLT has a reputation for quality, performance and value. interVOLT provides electronic power solutions for DC applications in the transport market.

What is an intervolt switchmode voltage stabiliser?

In short, the Intervolt Switchmode Voltage Stabilisers is a power conditioning device without the galvanic isolation. If you don’t require DC-DC isolation then the SVS is the cost effective solution for your application. The SVS is a common negative device for 12 and 24VDC transport applications.

When was the first intervolt converter made?

InterVOLT’s journey had officially begun. In May 2001 the first interVOLT Maxi Series Voltage Converter was released to the market. With our converters proving to be a great partner in the industry, the range was expanded to include isolated power conditioners, isolated voltage converters and battery equalisers.