What is the difference between English bond and English cross bond?

English Cross or Dutch Bond. English cross or Dutch bond is a variation of English bond which differs only in that vertical joints between the stretchers in alternate courses do not align vertically. These joints center on the stretchers themselves in the courses above and below.

What is English bond method?

English bond This is a pattern formed by laying alternate courses of stretchers and headers. The joins between the stretchers are centred on the headers in the course below. This is one of the strongest bonds but requires more facing bricks than other bonds.

What is the difference between flemish and English bond?

A flemish bond is a brick construction pattern that consists of alternate stretchers and headers for each course….Difference between English and Flemish Bond.

Expensive Economical
No strict supervision and skill is demanded Requires good workmanship and careful supervision.

What is English bond in brick masonry?

English Bond. English bond in brick masonry has one course of stretcher only and a course of header above it, i.e. it has two alternating courses of stretchers and headers. Headers are laid centered on the stretchers in course below and each alternate row is vertically aligned.

Which is the strongest bond in brickwork?

The header Bond in brick is considered to be the strongest and widely used bond in masonry construction. Header means a shorter square span face of the brick which has dimensions 9cm x 9cm. The arrangement is such that it forms the strongest bonding between bricks, making it the strongest bond for bricks.

How many bricks are in a square meter of English bond?

A standard UK metric brick measures 215 x 102.5 x 65mm, with mortar joints of 10mm, vertically and horizontally. However, if your project includes imperial bricks (potentially 225 x 110 x 73mm), you will need approximately 57 per square metre.

What is Monk Bond?

A monk bond is a type of brick laying pattern that is similar to Flemish bond, but with two stretchers and a header in the basic repeat pattern.

What is herringbone bond?

The herringbone bond is a variety of raking bond in which units are laid at an angle of 45° to the direction of the row, instead of horizontally. Alternate courses lie in opposing directions, resulting in a zigzag pattern.

What is Dutch bond?

English and dutch bonds are the particular pattern of laying bricks for constructing a wall. the basic difference is – English Bond – a bond used in brickwork consisting of alternate courses of stretchers and headers. Dutch bond – is created by laying alternate headers and stretchers in a single course.

What is zig zag bond?

Zig Zag Bond. This bond is similar to herring – bone bond, except that the bricks are laid in zigzag f. ashion. This bond is commonly used for making ornamental panels in the brick flooring.

What are the T junctions in Flemish bond?

T junctions in flemish bond In this type of bond, each course consists of header and structures alternately arranged. The Flemish bond as of two types, viz, Single Flemish and Double Flemish, The single Flemish bond consists of Flemish bond on the face of the wall and English bond on the back of the wall.

What is a T junction in architecture?

Two walls, one brick thick and one and a half brick thick, meeting at right angles at the centre (T-junction). Fig. 2.37. Two brick and one and a half brick T-junction, (e) Two, one and a half brick thick walls crossing each other at right angles.

What is an English bond?

The English bond consists of alternate layers of headers and stretchers. That is to say, one layer will be of stretchers and the other layer of headers. The alternate courses are of headers and stretchers. Each alternate header is centrally supported over a stret­cher.

What are the points to be noted in English bond construction?

The following additional points should be noted in English bond construction: (1) In English bond, a heading course should never start with a queen closer as it is liable to get displaced in this position. (2) In the stretcher course, the stretchers should have a minimum lap of 1/4th their length over the headers.